View STP7NK80ZFP_4971907.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB7NK80Z, STB7NK80Z-1 STP7NK80ZFP, STP7NK80Z
N-channel 800 V, 1.5 , 5.2 A, TO-220,TO-220FP,D2PAK,I2PAK Zener-protected SuperMESHTM Power MOSFET
Features
Type STP7NK80Z STP7NK80ZFP STB7NK80Z STB7NK80Z-1

VDSS (@Tjmax) 800V 800V 800V 800V
RDS(on) < 1.8 < 1.8 < 1.8 < 1.8
ID 5.2A 5.2A 5.2A 5.2A
1 2 3
TO-220
TO-220FP
Extremely high dv/dt capability 100% avalanche tested Gate charge minimized Very low intrinsic capacitances Very good manufacturing repeatability Figure 1. Internal schematic diagram
D(2)
1 3
3 12
D2PAK
I2PAK
Applications
Switching application
Description
The SuperMESHTM series is obtained through an extreme optimization of ST's well established strip-based PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage Power MOSFETs including revolutionary MDmeshTM products. Table 1. Device summary
Marking B7NK80Z B7NK80Z P7NK80Z P7NK80ZFP Package DPAK IPAK TO-220 TO-220FP Tube Packaging Tape e reel
G(1)
S(3)
AM01476v1
Order codes STB7NK80ZT4 STB7NK80Z-1 STP7NK80Z STP7NK80ZFP
March 2010
Doc ID 8979 Rev 6
1/17
www.st.com 17
Contents
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................. 6
3 4 5 6
Test circuits
.............................................. 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Electrical ratings
1
Electrical ratings
Table 2.
Symbol VDS VGS ID ID IDM
(2)
Absolute maximum ratings
Value Parameter Drain-source voltage (VGS = 0) Gate- source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25C Derating factor 5.2 3.3 20.8 125 1 4000 4.5 2500 TO-220 D2PAK I2PAK TO-220FP 800 30 5.2 (1) 3.3
(1)
Unit V V A A A W W/C V V/ns V C C
20.8(1) 30 0.24
PTOT
VESD(G-S) dv/dt (3) VISO Tj Tstg
Gate source ESD (HBM-C=100 pF, R=1.5 k) Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s; TC= 25 C) Max operating junction temperature Storage temperature
-55 to 150
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 5.2 A, di/dt 200 A/s, VDD V(BR)DSS, Tj TJMAX.
Table 3.
Symbol
Thermal data
Value Parameter TO-220 D2PAK I2PAK TO-220FP 1 62.5 300 4.2 Unit C/W C/W C
Rthj-case Thermal resistance junction-case max Rthj-amb Tl Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose
Table 4.
Symbol IAR EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting TJ = 25 C, ID = IAR, VDD = 50 V) Value 5.2 210 Unit A mJ
Doc ID 8979 Rev 6
3/17
Electrical characteristics
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
2
Electrical characteristics
(TCASE = 25 C unless otherwise specified) Table 5.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source Breakdown voltage Zero gate voltage Drain Current (VGS = 0) Gate-body leakage Current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID =1 mA, VGS = 0 VDS = Max rating VDS = Max rating, TC = 125 C VGS = 20 V VDS = VGS, ID = 100 A VGS = 10 V, ID = 2.6 A 3 3.75 1.5 Min. 800 1 50 10 4.5 1.8 Typ. Max. Unit V A A A V
Table 6.
Symbol gfs (1) Ciss Coss Crss Coss eq.
(2)
Dynamic
Parameter Test conditions Min. Typ. 5 1138 122 25 50 20 12 45 20 40 7 21 12 10 20 56 Max. Unit S pF pF pF pF ns ns ns ns nC nC nC ns ns ns
Forward transconductance VDS = 15 V, ID = 2.6 A Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge Off-voltage rise time Fall time Cross-over time VDS = 25 V, f = 1 MHz, VGS = 0
-
VDS =0 , VDS = 0 to 640 V VDD = 400 V, ID = 2.6 A, RG = 4.7 , VGS = 10 V (see Figure 17) VDD = 640 V, ID = 5.2 A, VGS = 10 V (see Figure 18) VDD = 640 V, ID = 5.2 A, RG = 4.7 , VGS = 10 V (see Figure 17)
-
td(on) tr tr(off) tr Qg Qgs Qgd tr(Voff) tr tc
-
-
-
1. Pulsed: pulse duration=300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS.
4/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Electrical characteristics
Table 7.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 5.2 A, VGS = 0 ISD = 5.2 A, di/dt = 100 A/s VDD = 50 V, Tj = 150C (see Figure 22) Test conditions Min. 530 3.31 12.5 Typ. Max. 5.2 20.8 1.6 Unit A A V ns C A
-
1. Pulsed: pulse duration=300s, duty cycle 1.5% 2. Pulse width limited by safe operating area
Table 8.
Symbol BVGSO
Gate-source zener diode
Parameter Test conditions Min. 30 Typ. Max. Unit V
Gate-source breakdown voltage IGS= 1mA (open drain)
The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components.
Doc ID 8979 Rev 6
5/17
Electrical characteristics
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
2.1
Figure 2.
Electrical characteristics (curves)
Safe operating area for TO-220, D2PAK, I2PAK Figure 3. Thermal impedance for TO-220, D2PAK, I2PAK
Figure 4.
Safe operating area for TO-220FP
Figure 5.
Thermal impedance for TO-220FP
Figure 6.
Output characteristics
Figure 7.
Transfer characteristics
6/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z Figure 8. Transconductance Figure 9.
Electrical characteristics Static drain-source on resistance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage vs temperature
Figure 13. Normalized on resistance vs temperature
Doc ID 8979 Rev 6
7/17
Electrical characteristics Figure 14. Source-drain diode forward characteristic
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z Figure 15. Normalized BVDSS vs temperature
Figure 16. Maximum avalanche energy vs temperature
8/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Test circuits
3
Test circuits
Figure 18. Gate charge test circuit
VDD 12V
2200
Figure 17. Switching times test circuit for resistive load
47k 100nF
1k
RL VGS VD RG PW D.U.T.
F
3.3 F
VDD Vi=20V=VGMAX
2200 F
IG=CONST 100 2.7k 47k PW 1k
AM01469v1
D.U.T. VG
AM01468v1
Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test switching and diode recovery times circuit
A D G S B 25 D.U.T.
A FAST DIODE B
A L=100H B D G 3.3 F 1000 F
L
VD
2200 F
3.3 F
VDD
VDD
ID
RG
S
Vi
D.U.T.
Pw
AM01470v1 AM01471v1
Figure 21. Unclamped inductive waveform
V(BR)DSS VD
Figure 22. Switching time waveform
ton tdon tr toff tdoff tf
90% IDM
90% 10%
ID VDD VDD
0
10%
VDS 90%
VGS
AM01472v1
0
10%
AM01473v1
Doc ID 8979 Rev 6
9/17
Package mechanical data
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
10/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Package mechanical data
Table 9.
Dim.
TO-220FP mechanical data
mm Min. Typ. Max. 4.6 2.7 2.75 0.7 1 1.70 1.70 5.2 2.7 10.4 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2
A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia
4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10
Figure 23. TO-220FP drawing
L7 E
A B
D Dia L6 L5
F1
F2 F
H G1
G
L2 L3
L4
7012510_Rev_K
Doc ID 8979 Rev 6
11/17
Package mechanical data
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
TO-220 type A mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 Typ Max 4.60 0.88 1.70 0.70 15.75
0015988_Rev_S
12/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Package mechanical data
IPAK (TO-262) mechanical data
mm Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050
inch Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055
Doc ID 8979 Rev 6
13/17
Package mechanical data
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
D2PAK (TO-263) mechanical data
Dim A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2
mm Min 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
in c h Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
14/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Packaging mechanical data
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
Doc ID 8979 Rev 6
15/17
Revision history
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
6
Revision history
Table 10.
Date 09-Sep-2004 16-Aug-2006 09-Oct-2006 28-Mar-2010
Revision history
Revision 3 4 5 6 Complete version New template, no content change Corrected order code Corrected Table 1: Device summary Changes
16/17
Doc ID 8979 Rev 6
STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 8979 Rev 6
17/17

▲Up To Search▲

Price & Availability of STP7NK80ZFP

	To Download STP7NK80ZFP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .